Call today 1-800-661-6700

Sample Preparation - Organic Products

We offer a vast range of premium sample preparation instruments including:

Cutting equipment, Cell disruption, Grinding and Homogenizing equipment, Mixing and Milling equipment with Cryogenic options, and Pulverizers.

Distillation instruments for Nitrogen, Protein, Phenol, Dietary Fiber/ Raw Fiber Extractors, Fat Extraction and Filtration devices, Kjeldahl Digestion Systems and Acid Hydrolysis Units, Systems for Microwave based Extraction and Synthesis.

Also available are automated GPC, Evaporation and SPE systems designed exclusively for Environmental sample pre-treatment and clean up prior to GC/ GC-MS analysis. AOAC and EPA method 3640 cite GPC and Evaporation techniques.

A wide range of methods comply with AOAC , ISO, USP 233, USP 2232 and EPA methods 3015A, 3051A, 3052 along with 3546. As well, ASTM E1645-01, ASTM D5513-99, ASTM D4309-96 and ASTM E1741-00 can also be met along with guidelines according to Weende, NDF/ADF and Van Soest.

Asphalt Binder Analyzer  ABA 7/35B

Asphalt Binder Analyzer ABA 7/35B

Carbolite | Sample Preparation - Organic

The ABA 7/35B is designed to measure the asphalt binder content of hot mix asphalt as well as warm mix asphalt using loss on ignition in accordance with AASHTO T 308-10, ASTM D6307-10 & BS/EN 12697-39:2012. The integral microprocessor…

ASTM D1160 Vacuum Distillation

ASTM D1160 Vacuum Distillation

DC Scientific | Sample Preparation - Organic

The B/R D1160 Vacuum Distillation Instrument is an easy to use apparatus for the distillation of petroleum products. More information Data sheet

Automated REID Vapor Pressure Apparatus AutoReid

Automated REID Vapor Pressure Apparatus AutoReid

DC Scientific | Sample Preparation - Organic

The AutoREID apparatus from AD systems is an automated Reid Vapor pressure instrument in full compliance with ASTM D323-B, ASTM 4953, and similar standards. These methods are for the determination of vapor pressure of gasoline, volatile cru…

Automatic Distillation & Titration System Kjeldahl Nitrogen UDK 159

Automatic Distillation & Titration System Kjeldahl Nitrogen UDK 159

VELP Scientifica | Sample Preparation - Organic

The UDK 159 is a fully automatic Kjeldahl distillation unit, with built in titrator and well suited for applications such as ammonia, nitrogen, protein, nitrogen content (Kjeldahl or direct alkaline distillation), nitric nitrogen (after red…

Carbon 14 Tritium Furnace MTT 12/38/850

Carbon 14 Tritium Furnace MTT 12/38/850

Carbolite | Sample Preparation - Organic

This apparatus uses catalyst assisted combustion techniques to give a clean and precise approach to extracting carbon-14 & organically bound tritium or 'fixed tritium', eg tritium contained in concretes, steels and graphites, as well as…

Coal Drying  High and Low Temperature Ovens CDHT CDLT

Coal Drying High and Low Temperature Ovens CDHT CDLT

Carbolite | Sample Preparation - Inorganic, Sample Preparation - Organic

CDHT (Coal Drying High Temperature) and CDLT (Coal Drying Low Temperature) ovens are suitable for drying coal in accordance with: ASTM D2691 - 01, ASTM D2961 - 01a, ASTM D2961 - 02 ASTM D2961 - 95a, ASTM 3302 / D3302M-10, BS 1016-102:2000,…

Combustion Tube Furnaces for Carbon and Hydrogen CFM

Combustion Tube Furnaces for Carbon and Hydrogen CFM

Carbolite | Sample Preparation - Organic

The CFM combustion tube furnace has been specifically engineered for the determination of carbon and hydrogen in coal and coke. The CFM is available for maximum operating temperatures up to 1200°C (CFM 12) and for maximum operating tem…

Cryogenic Mill - Cryomill

Cryogenic Mill - Cryomill

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

The CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components a…

Cutting Mill SM 100

Cutting Mill SM 100

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The SM 100 is the budget-priced basic model among the RETSCH cutting mills. With its strong 1.5 kW drive and 1,500 rpm…

Cutting Mill SM 200

Cutting Mill SM 200

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The new cutting mill SM 200 is a powerful and easy-to-operate instrument for efficient primary and fine size reduction.…