Call Today 1-800-661-6700

AD Systems Products

SP10 Smoke Point Tester

SP10 Smoke Point Tester

AD Systems | Chemical Identification

The SP10 Automated Smoke Point of Aviation Turbine Fuels and Kerosenes is now officially part of ASTM D1322. Here is a link to the approved ASTM method. Please note the following statement included in the method: 1.2 An interlaboratory stu…

Automated REID Vapor Pressure Apparatus AutoReid

Automated REID Vapor Pressure Apparatus AutoReid

AD Systems | Sample Preparation - Organic

The AutoREID apparatus from AD systems is an automated Reid Vapor pressure instrument in full compliance with ASTM D323-B, ASTM D4953, and similar standards. These methods are for the determination of vapor pressure of gasoline, volatile cr…

Deposit Rater Tester for Jet Fuel DR10

Deposit Rater Tester for Jet Fuel DR10

AD Systems | Spectroscopy

A new instrumental method of quantitative measurement of tube deposits has been developed by AD Systems, in which the thickness of the deposit is accurately determined by an automatic instrument, reducing test subjectivity. The innovative D…

Dispersancy Tester DT100DL

Dispersancy Tester DT100DL

AD Systems | Sample Preparation - Inorganic

The requirement for on-line machinery and oil condition monitoring is becoming evermore apparent as maintenance costs increase and production capacity and equipment performance are maximized. One of the primary functions of a lubricant is…

NACE Spindle Corrosion Test CT10

NACE Spindle Corrosion Test CT10

AD Systems | Spectroscopy

A new instrumental approach for measurement of corroded surface area has been developed by AD Systems in which the exact percentage of corroded area is accurately determined by an automatic instrument reducing test subjectivity. The innovat…

ST10 On-site Fuel Stability and Compatibility Tester ASTM D4740

ST10 On-site Fuel Stability and Compatibility Tester ASTM D4740

AD Systems | Chemical Identification

Bulk fuel stored for long periods can become unstable the asphaltene content can precipitate out of solution causing the formation of sludge. This has the potential to block filters and pipes, leaving tanks with an unpumpable residue. The…

TO10 Thermal Oxidation Stability Test Rig

TO10 Thermal Oxidation Stability Test Rig

AD Systems | Chemical Identification

The ASTM D3241 / IP 323 Thermal Stability test is one of the most important tests for the jet fuel quality. This test method was inherently limited due to the subjectivity in the color standard for tube deposit rating Recently advanced tes…