Call Today 1-800-661-6700

Retsch Products

Cutting Mill SM 400

Cutting Mill SM 400

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the applic…

Cyclone Mill Twister

Cyclone Mill Twister

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated c…

HAMMER MILL HM 200

HAMMER MILL HM 200

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

The rugged RETSCH Hammer Mill HM 200 accepts large feed sizes up to 100 mm which can be reduced to less than 0.8 mm, depending on the sample properties.The mill is ideally suited for processing large volumes batchwise or continuously which…

Mixer Mill MM 500 Control

Mixer Mill MM 500 Control

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

The MM 500 control is a high energy laboratory ball mill that can be used for dry, wet and cryogenic grinding with a frequency of up to 30 Hz. It is the first mixer mill in the market that allows to monitor and control the temperature of a…

Mixer Mill MM 500 VARIO

Mixer Mill MM 500 VARIO

Retsch | Sample Preparation - Inorganic, Materials Processing, Cell Disruption

PROCESSING 2 TO 50 SAMPLES IN ONE BATCH The new Mixer Mill MM 500 vario is a versatile bench-top unit which provides ultimate performance with maximum flexibility for your sample preparation process. It is used for dry, wet and cryog…

Air Jet Sieving Machine AS 200

Air Jet Sieving Machine AS 200

Retsch | Particle Size Analysis

The new Air Jet Sieve AS 200 jet is particularly suitable for sieve cuts of powdered materials which require efficient dispersion and desagglomeration. The option to store up to 10 SOPs and the automatic vacuum regulator (accessory) guarant…

Cross Beater Mill SK 300

Cross Beater Mill SK 300

Retsch | Materials Processing

The Cross Beater Mill SK 300 is suitable forcoarse and fine size reduction, either in batches or continuously.It can processmedium-hard and brittle materialsand is easy to operate.With itsadjustable speedof 2,000 to 4,000 rpm the SK 300 is…

Cryogenic Mill - Cryomill

Cryogenic Mill - Cryomill

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic, Cell Disruption

The CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components a…

Cutting Mill SM 100

Cutting Mill SM 100

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The SM 100 is the budget-priced basic model among the RETSCH cutting mills. With its strong 1.5 kW drive and 1,500 rpm…

Cutting Mill SM 200

Cutting Mill SM 200

Retsch | Sample Preparation - Inorganic, Sample Preparation - Organic

Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The new cutting mill SM 200 is a powerful and easy-to-operate instrument for efficient primary and fine size reduction.…